10W Facade Column Light – 7° COB | IP68 | 7 Colour Options

Overview

The 10W Facade Column Light (Model 1142) is a wired LED narrow-beam spotlight designed specifically for building facade floodlighting, column uplighting, architecture accent lighting, housing society compound wall wash lighting, hotel and resort exterior elevation lighting, farmhouse and heritage building facade illumination, commercial complex exterior pillar and column lighting, and any Indian indoor or outdoor architectural application requiring a 7-degree narrow beam LED spotlight. Available in seven colour options — Cool White, Neutral White, Warm White, Red, Green, Blue, and Pink — the Model 1142 is the most versatile colour-specification product in the LumenCity wired LED range. Featuring a COB (Chip On Board) LED module with 11mm COB size, an aluminium body, IP68 waterproofing, and 90-265V AC input, the Model 1142 is a compact 13 x 7 x 5.5 cm spotlight appropriate for ground-level or low-position column uplighting, facade wash mounting, and architectural accent installation. The 7-degree narrow beam angle concentrates the 10W COB output into a tight column of light for precise architectural accent uplighting of building columns, facade pilasters, and decorative elevation features.

LED Performance – 10W COB 11mm | 7° Narrow Beam

The 10W Facade Column Light Model 1142 integrates a COB LED module with a confirmed 11mm COB size delivering 10W concentrated output through the 7-degree narrow beam angle. COB (Chip On Board) LED technology places multiple LED chips directly on the circuit board without individual packaging, producing the high-density, uniform light source appropriate for narrow-beam spotlight applications where a single concentrated point source is required for architectural accent uplighting. The 7-degree beam angle is the narrowest confirmed beam angle in the LumenCity wired LED range — concentrating the 10W COB output into a tight upward column appropriate for column uplighting, facade pilaster accent, facade cornice highlighting, and building elevation architectural feature illumination. The seven available colour options — Cool White, Neutral White, Warm White, Red, Green, Blue, and Pink — enable architectural lighting designers and procurement managers to select the precise colour for each application: white variants for permanent facade accent lighting and coloured variants for temporary event decoration, festive building illumination, and coloured accent architectural feature lighting on Indian hotel facades, housing society compound boundary feature walls, and commercial complex exteriors.

Body Build & Weatherproofing – IP68 Aluminium, 13 x 7 x 5.5 cm

The 10W Facade Column Light Model 1142 measures 13 x 7 x 5.5 cm in an aluminium body with IP68 waterproofing. The compact 13 cm housing circular housing at 5.5 cm depth length — visible in the product photograph as a cylindrical spike-base spotlight with lens and bracket — is the standard narrow-beam facade spotlight form factor used across building elevation and column uplighting installations worldwide. Aluminium construction provides heat dissipation appropriate for a 10W COB LED fitting at the compact 13 cm housing diameter and corrosion resistance for permanent outdoor building facade installation. IP68 waterproofing certifies complete dust ingress protection and resistance to water jets from any direction — enabling permanent outdoor installation on building facades, column bases, and architectural feature positions across India’s full climate range, including the monsoon zones of Kerala, Maharashtra, and the Western Ghats. The housing visible in the product photograph includes an adjustable bracket enabling the 7-degree beam to be directed precisely at the target architectural feature.

Input Power – 90-265V AC | Colour Selection at Purchase

The 10W Facade Column Light Model 1142 operates on 90-265V AC mains input — confirmed from the product specification. No solar panel, battery, remote control, or sensor is specified. The 90-265V wide input is compatible with India’s 220-240V standard supply and tolerant of voltage fluctuations from 180V to 265V. The colour is specified at the time of purchase from the seven confirmed options — no colour-changing function is specified in the product brief. For building facade uplighting projects where different architectural features require different accent colours, multiple units in different colour specifications can be installed on the same 90-265V supply circuit. The 7-degree beam requires precise alignment at installation — the adjustable bracket visible in the product photograph enables beam direction adjustment after mounting.

Mains Power – Not Solar

Not applicable — the 10W Facade Column Light Model 1142 is a mains-powered wired LED spotlight on 90-265V AC. No solar panel, battery, backup time, or off-grid function applies. The fitting connects to the 90-265V AC mains supply through standard conduit and junction box installation. For building facade uplighting schemes where underground or surface-mounted conduit supplies power from the building distribution board to the column base positions, the Model 1142’s 90-265V AC input connects directly to the conduit circuit at each column position.

Installation & Mounting – Column Base / Spike / Wall Bracket

The 10W Facade Column Light Model 1142 installs at column base, ground-level spike, or low wall bracket positions targeting architectural facade features for uplighting. The 13 x 7 x 5.5 cm aluminium housing mounts on a standard spike base (for ground-level column uplighting), wall bracket (for horizontal column surface mounting), or surface base (for compound boundary wall column base positions). Mains AC wiring through conduit connects the 90-265V AC supply to the fitting junction box at each installation position by a qualified electrician. The adjustable bracket enables the 7-degree narrow beam to be directed precisely at the target column face or facade feature after installation — vertical, diagonal, or angled alignment is achievable at the bracket adjustment range. For housing society compound column uplighting, hotel entrance column facade lighting, and commercial complex pillar accent lighting schemes, the Model 1142 colour specification at procurement enables consistent colour across all column positions on the same scheme.

Technical Specifications

Ideal Applications

• Building facade column and pilaster uplighting with 7-degree narrow beam precision
• Housing society compound boundary wall column base and feature wall uplighting
• Hotel and resort entrance column, porch pillar, and facade feature accent lighting
• Commercial complex and office building exterior pillar and facade column lighting
• Farmhouse and heritage building facade elevation and column accent lighting
• Festive and event colour lighting on building facades (Red, Green, Blue, Pink options)
• Garden pathway spike uplighting on trees, plants, and landscape feature lighting