6W K-Light Wall Light 2 Way – COB LED | IP65 | Aluminium

Overview

The 6W K-Light Outdoor Wall Light 2 Way (Model 1156) is the premium variant in the LumenCity K-Light wired wall light series — a wider 145 x 80 x 65 mm dual-COB angular housing delivering 6W bi-directional wall accent lighting in the characteristic K-Light angular body design. Designed for building elevation lighting, housing society compound boundary wall and entrance columns, hotel and resort exterior facade panels, housing colony entrance walls and gate pillars, commercial complex and office building exterior walls, farmhouse porch and terrace wall lighting, and any Indian outdoor wall surface requiring 6W bi-directional COB LED wall accent illumination. The 2 Way configuration positions two COB LED modules in the 145 mm wide housing — one directing output upward and one downward — creating the bi-directional wall wash accent effect appropriate for building elevation feature positions, compound entrance gate pillars, hotel facade panels, and compound boundary wall sections. The wider 145 mm housing at 6W doubles the LED power output of the 3W Model 1155 and delivers bi-directional coverage from a single wall mount position.

LED Performance – COB 11mm | 6W | 2 Way

The 6W K-Light Outdoor Wall Light 2 Way Model 1156 integrates two COB LED modules — each with the confirmed 11mm COB size — producing bi-directional 6W output. The dual 11mm COB configuration places one COB LED module facing upward and one facing downward within the angular K-Light housing, creating the bi-directional wall accent pattern that illuminates both the wall surface above and below the fitting simultaneously. COB technology at 6W produces higher-density luminous output than equivalent SMD LED chip configurations, with superior uniformity of illumination across the wall surface. At 6W total output across two COB modules, the K-Light 2 Way delivers double the LED power of the 3W Model 1155, appropriate for wider compound boundary wall sections, hotel exterior facade panels, and building elevation positions where the 3W single-direction output would provide insufficient illumination intensity. The 2700-6500K CCT range enables full warm-to-cool white specification.

Body Build & Weatherproofing – IP65 Aluminium

The 6W K-Light Outdoor Wall Light 2 Way Model 1156 measures 145 x 80 x 65 mm — 65 mm wider than the 3W Model 1155 at 80 x 80 mm, accommodating the two-COB configuration in the wider housing. Aluminium die-cast body with IP65 waterproofing — identical material and weatherproofing specification to the 3W model. IP65 certifies complete dust and water jet protection for permanent outdoor building elevation and compound boundary wall installation across India’s full climate range. The 145 mm width accommodates the dual COB housing arrangement while maintaining the same 80 mm height and 65 mm wall projection depth as the 3W model, enabling the 2 Way housing to be installed at identical mounting heights and using the same conduit specification as the 1 Way model. At 6W in a 145 x 80 mm format, the K-Light 2 Way is the standard selection for building elevation feature positions and compound entrance gate pillar lighting in Indian housing societies, hotels, and commercial complexes.

Input Power & Operating Specification – 90-265V AC

The 6W K-Light Outdoor Wall Light 2 Way Model 1156 operates on 90-265V AC mains input — identical electrical specification to the 3W Model 1155. No solar panel, battery, or remote control is specified. The 2 Way bi-directional COB configuration delivers the up-and-down wall accent pattern at 6W total output from a single 145 x 80 mm housing — providing twice the LED output of the 3W 1 Way model in a bi-directional format appropriate for the feature wall positions where the 3W single-direction model would be used for standard wall positions. For building elevation lighting schemes where different wall positions are specified with different intensities and directions, the 3W 1 Way and 6W 2 Way models can be mixed across the same scheme with the same 90-265V AC supply specification.

Mains Power – Not Solar

Not applicable — the K-Light Outdoor Wall Light is a mains-powered wired LED light operating on 90-265V AC input. No solar panel, battery, off-grid function, or backup time specification applies. The 90-265V AC input connects to the standard Indian mains electrical supply (220-240V) through standard conduit and junction box installation by a qualified electrician. Operation is dependent on mains power supply continuity.

Installation & Wall Mounting

The 6W K-Light Outdoor Wall Light 2 Way Model 1156 requires mains electrical connection by a qualified electrician. The 145 x 80 mm housing mounts on compound boundary wall surfaces, building elevation panels, hotel facade positions, and gate pillar face surfaces using the housing bracket and standard masonry fixings. The shared 80 mm height and 65 mm depth with the 3W Model 1155 enables identical bracket depth specification for both models, with only the wider 145 mm versus 80 mm footprint requiring different horizontal spacing. For mixed K-Light 3W and 6W schemes across Indian housing society compound walls and hotel facade panels, the shared aluminium IP65 body style provides consistent aesthetic across all wall positions.

Technical Specifications

Ideal Applications

• Housing society compound boundary wall 2 Way K-Light LED accent lighting
• Hotel and resort exterior facade panel and entrance wall LED accent lighting
• Office building and commercial complex exterior elevation LED wall lighting
• Housing colony main entrance wall and gate pillar LED accent lighting
• Farmhouse exterior porch wall and terrace perimeter LED accent lighting
• Staircase riser wall and step edge COB LED accent and safety lighting
• Shopping mall, hospital, and institutional building exterior wall lighting