8W Solar Flood Light – LiFePO4 | 12Hr Backup | Remote Control

Overview

The 8W Solar Flood Light Traditional Style (Model 1126) is an all-in-one, semi-integrated off-grid solar flood light in a traditional rectangular flood light body design, built for housing society compound perimeter and entrance floodlighting, parking lot and vehicle compound security lighting, factory and warehouse exterior wall lighting, farmhouse estate boundary floodlighting, housing colony main gate and entrance area lighting, rural road junction lighting, and any Indian outdoor environment requiring 8W cool-white solar flood illumination with 12-hour LiFePO4 backup and remote control. The Traditional Style designation from the product image identifies this as a conventional rectangular flood body housing — distinct from the Lens Model City/Sky Light series — providing a familiar, widely-compatible flood light form factor for standard wall bracket and pole bracket installations across Indian compound perimeter and parking lot positions. Featuring 100W LED power output, a 3.2V 20Ah LiFePO4 battery providing 12 hours of cool white illumination, a 5V 20W polycrystalline panel, and the full remote control mode set, the Model 1126 delivers IP65-rated off-grid solar flood lighting. Note: LED chip count is not stated in the product specification — LED Power of 100W is used as confirmed.

LED Performance & Light Output – 100W LED Power

The 8W Solar Flood Light Traditional Style Model 1126 delivers 100W LED power output — the confirmed LED specification from the product image. Note: individual LED chip count and chip type are not stated in the product specification and have been omitted per the brief instruction to omit unconfirmed specs. At 100W LED power output, the Model 1126 delivers the cool white flood illumination appropriate for compound perimeter floodlighting, parking lot area lighting, and factory exterior wall lighting at 4-6 metre mounting heights on housing society compound walls and parking lot poles. Cool white at approximately 5000-6500K is the confirmed light colour, providing the maximum contrast and visibility for security floodlighting and compound entrance identification at Indian housing societies, industrial establishments, and rural commercial facilities. The Traditional Style rectangular housing orients the LED array in the wide horizontal pattern of a standard flood light, providing the broad-angle coverage appropriate for wide compound perimeter wall positions.

Battery – LiFePO4 3.2V 20Ah LiFePO4 & 12Hr Backup

The 3.2V 20Ah LiFePO4 battery in the 8W Solar Flood Light Traditional Style Model 1126 provides 12 hours of illumination per charge. LiFePO4 at 20Ah delivers 2,000+ charge-discharge cycles — more than five years of daily operation — with stable thermal performance across India’s full outdoor temperature range, from sub-zero January nights in north Indian hill stations to 48-degree Celsius Rajasthan summers. LiFePO4 has no thermal runaway risk under high-temperature conditions — a critical safety advantage over standard Li-ion batteries in permanent outdoor installations in India’s hot climate zones. At 20Ah, the Model 1126 battery is 2 times the capacity of the 10Ah City Light Model 1122 — providing a larger energy reserve for the 100W LED draw at the 12-hour specification. In Auto remote mode — 100% for 20 minutes, 70% for 4.5 hours, 30% for remaining hours — the 20Ah reserve is actively managed across the full 12-hour cycle.

Body Build & Weatherproofing – IP65, Traditional Style

The 8W Solar Flood Light Traditional Style Model 1126 measures 25 x 32 x 10 cm and carries IP65 waterproofing — confirmed in the product specification and the IP65 badge visible in the product photograph. IP65 certifies complete dust ingress protection and resistance to water jets from any direction, enabling year-round permanent outdoor installation across India’s full range of climate conditions. The Traditional Style designation confirms a conventional rectangular flood body — the standard form factor for wall bracket and pole bracket mounting across Indian compound perimeter, parking lot, and factory exterior lighting installations. The 25 x 32 x 10 cm body dimensions are appropriate for standard Indian solar flood light wall bracket fittings. The ABS + PC construction provides impact resistance and UV stability appropriate for permanent outdoor installation. The “Traditional Style” designation in the product specification image differentiates this model from the orange-highlighted Lens Model City/Sky Light series in the LumenCity solar flood light range.

Remote Control & Operating Modes

The 8W Solar Flood Light Traditional Style Model 1126 is controlled by a wireless remote with the full confirmed mode set from the product specification image: Auto mode (100% for 20 minutes, 70% for 4.5 hours, 30% for remaining hours), On/Off mode (sensor-controlled), 3H timed mode, 5H timed mode, 8H timed mode, Half brightness (50%), and Full brightness (100%). Auto mode is the recommended daily setting for housing society compound perimeter and parking lot floodlighting where dusk-to-dawn 12-hour operation is the specification. The step-down from 100% to 70% to 30% conserves the 20Ah LiFePO4 reserve across the 12-hour cycle. For rural road junction and farmhouse entrance positions where lighting is required only during peak evening hours, the 3H or 5H timed modes conserve battery for reliable following-day recharge.

Solar Panel & Charging Efficiency – 5V 20W POLY

The 5V 20W polycrystalline solar panel in the 8W Solar Flood Light Traditional Style Model 1126 charges the 20Ah LiFePO4 battery within 6-8 hours of direct sunlight. The POLY specification is confirmed from the product image. The 5V 20W panel connects via the semi-integrated cable, enabling south-facing skyward positioning independent of the flood light body mounting direction. For open-sky compound perimeter, parking lot pole, and factory exterior wall positions in India’s high-irradiance states, the 20W panel achieves consistent full 20Ah daily recharge within the 6-8 hour window. In high-rainfall monsoon zones of Kerala, Karnataka, and the Western Ghats, consecutive overcast days reduce panel output — the 20Ah battery reserve provides resilience across moderate overcast conditions by maintaining 12-hour operation without requiring full daily recharge.

Installation & Mounting

The 8W Solar Flood Light Traditional Style Model 1126 installs on any outdoor wall, pole, or bracket without mains power or underground cable. The conventional Traditional Style rectangular body mounts on standard wall brackets or pole brackets — no custom hardware required. The 5V 20W POLY panel is installed separately and connected via cable. No electrician, conduit, or switchboard is required. The wireless remote controls all modes from a distance post-installation. For housing society compound perimeter lighting where the Traditional Style form factor is preferred over the newer Lens Model design, the Model 1126’s conventional body is directly compatible with existing bracket infrastructure. The off-grid solar design eliminates underground cabling cost — the largest installation expense for conventional wired compound flood lighting.

Technical Specifications

Specification	Model 1126  /  8W Solar Flood Light  /  Traditional Style
Model	1126
Style	Traditional Style
LED Power	100W
LED Chip Count	Not stated in product specification
Solar Panel	5V 20W POLY
Battery	3.2V 20Ah LiFePO4
Charging Time	6-8 Hours
Lighting Time	12 Hours
Light Colour	Cool White
IP Rating	IP65
Remote Modes	Auto / On-Off / 3H / 5H / 8H / Half / Full
Unit Size	25 x 32 x 10 cm
Qty Per Carton	10 Pieces

 

Ideal Applications

• Housing society compound perimeter and entrance area 8W solar flood lighting
• Parking lot and vehicle compound area solar flood security lighting
• Factory and warehouse exterior wall solar flood lighting
• Farmhouse estate boundary and approach road solar flood lighting
• Housing colony main gate and entrance area cool-white solar flood lighting
• Rural road junction, petrol station, and commercial establishment flood lighting