12 Watt LED Wall Elevation Light 4 Way – EPISTAR | IP65 | Aluminium

Overview

The LED Wall Elevation / Step Light 4 Way Lens Model (Model 1152) is a wired LED outdoor wall light in a 4-way lens configuration, designed for building elevation lighting, housing society compound boundary walls and entrance pillars, hotel and resort exterior facade panels, housing colony entrance walls and gate pillars, commercial complex exterior facades, staircase accent lighting, and any Indian indoor or outdoor wall surface requiring 4-way directional LED wall accent lighting. Featuring EPISTAR/OSRAM LED chips, aluminium die-cast body, IP65 waterproofing, and 90-265V input, the 4 Way Lens Model 1152 delivers LED output in four confirmed directions — creating the 4-point star-shaped light pattern on the wall surface visible in the product photographs. The same compact 7 x 7 x 7 mm housing as the 2 Way Model 1300 — the 4 Way configuration adds two additional beam directions (left and right, in addition to up and down) creating a wider, more decorative wall accent effect appropriate for compound entrance gate pillars, hotel entrance facade panels, and building elevation feature positions.

LED Performance & Light Output – 4 Way Lens Model

The LED Wall Elevation Light 4 Way Lens Model 1152 integrates EPISTAR/OSRAM LED chips in a 4-way lens configuration producing output in four confirmed directions — upward, downward, left, and right — creating the 4-point star-shaped wall accent pattern. The 4-way configuration produces a wider, more decorative wall surface pattern than the 2-way Model 1300, making the 1152 appropriate for feature wall positions — compound entrance gate pillars, hotel entrance facade panels, and building elevation accent positions — where the wider 4-directional beam pattern creates a more prominent decorative wall effect. EPISTAR/OSRAM premium chip specification is identical to the 2 Way Model, providing the same LED quality standard across both beam configurations. The 2700-6500K CCT range enables warm-to-cool white selection at specification, covering the full range of Indian residential and commercial elevation lighting applications.

Body Build & Weatherproofing – IP65 Aluminium Die-Cast

The LED Wall Elevation Light 4 Way Lens Model 1152 shares the 7 x 7 x 7 mm aluminium die-cast IP65 body with the 2 Way Model 1300 — enabling identical installation hardware and identical bracket and conduit specifications across mixed 2-way and 4-way installations on the same building elevation or compound boundary wall scheme. The shared body dimensions confirm that the 2-way and 4-way configurations are differentiated by the LED lens arrangement within the same housing — not by housing size — simplifying procurement for architects and interior designers specifying mixed-configuration wall elevation lighting schemes. Aluminium die-cast construction provides corrosion resistance, heat dissipation, and structural durability across India’s full climate range. IP65 certifies complete dust and water jet protection for permanent outdoor building elevation and staircase installation.

Input Power & Operating Specification – 90-265V AC

The LED Wall Elevation Light 4 Way Lens Model 1152 operates on mains AC power at 90-265V input — identical electrical specification to the 2 Way Model 1300. No solar panel, battery, or remote control is included. The 4-way lens produces the wider 4-directional wall surface pattern at the same compact 7 x 7 x 7 mm housing footprint. For building elevation lighting schemes where the architect or interior designer has specified 4-way accent lighting at gate pillar, entrance wall, and compound boundary wall positions, the Model 1152 delivers the 4-directional LED pattern from the standard aluminium wall light housing format used across the LumenCity wall elevation light series.

Mains Power – Not Solar

Not applicable — the LED Wall Elevation Light 4 Way Lens Model 1152 is a mains-powered wired LED light on 90-265V AC. No solar panel included. The wide 90-265V input accommodates Indian mains supply variations from 180V to 265V.

Installation & Wall Mounting

The LED Wall Elevation Light 4 Way Lens Model 1152 installs identically to the 2 Way Model 1300 — mains wiring connection through conduit to junction box by a qualified electrician. The shared 7 x 7 x 7 mm housing enables the 2-way and 4-way models to use identical brackets and conduit fittings on the same compound boundary wall or building elevation scheme. For housing society compound boundary wall lighting where the 4-way model is specified for entrance gate pillar positions and the 2-way model for perimeter wall positions, the shared housing simplifies installation management with a single bracket specification across the full scheme.

Ideal Applications

• Housing society compound boundary wall 4 Way Lens Model LED elevation lighting
• Hotel and resort exterior facade panel and entrance wall LED accent lighting
• Office building and commercial complex exterior elevation LED wall lighting
• Housing colony main entrance wall, gate pillar, and compound boundary lighting
• Farmhouse exterior wall, porch, and estate entrance elevation LED lighting
• Staircase riser wall and step edge LED accent and safety lighting
• Shopping mall, hospital, school, and institutional building exterior wall lighting

Technical Specifications