Solar Wall Light 2-Side – Compact | IP65 | Auto On/Off

Overview

The Solar Plastic Wall Light – 2-Side Illumination (Model 1114) is an all-in-one, off-grid solar wall light in the most compact housing in the LumenCity solar wall light range, designed for staircase riser walls, housing colony compound step edges, housing society common staircase walls, farmhouse porch step surfaces, hotel and resort garden staircase walls, parking compound step edges, and any Indian outdoor wall surface where a minimal-profile solar wall light with bilateral LED output is required without mains wiring. At just 10 x 5 x 3 cm — confirmed from the product photograph dimension annotations showing 10 cm width and 5 cm height — the Model 1114 is the smallest solar wall light in the LumenCity range, with a footprint smaller than a standard playing card. Featuring 2 LED warm white output in a bilateral (2-side) illumination format, a 1W solar panel visible as the large panel face occupying most of the 10 x 5 cm front surface, and a 1.5V 900mAh battery providing 6-7 hours of illumination, the 1114 delivers compact dusk-to-early-morning warm white wall lighting. IP65 waterproofing enables year-round outdoor installation. The “2-side illumination” description in the permalink refers to the bilateral LED output — LEDs positioned to project light from both sides or edges of the compact housing.

LED Performance & Light Output – 2 LED Warm White, 2-Side

The Solar Plastic Wall Light Model 1114 integrates 2 LED warm white chips in a 2-side illumination configuration — the confirmed LED count and illumination format from the product specification and permalink. At 2 LEDs, the Model 1114 produces a low-intensity warm white output appropriate for the compact 10 x 5 x 3 cm housing and the primary use cases of staircase step edge lighting, pathway edge marking, and low-level ambient wall lighting at housing society compound staircases and hotel garden steps. The 2-side illumination format distributes the 2-LED warm white output in a bilateral pattern — projecting light from both sides or edges of the compact housing — appropriate for step edge and staircase riser wall positions where bilateral coverage marks the step edge from both the ascending and descending pedestrian perspectives. Warm white output at approximately 3000K provides the soft ambient quality appropriate for residential staircase and step edge lighting in housing society compounds, hotel garden staircases, and farmhouse porch step surfaces.

Battery – 1.5V 900mAh Capacity & 6-7Hr Backup

The 1.5V 900mAh battery in the Solar Plastic Wall Light Model 1114 provides 6-7 hours of warm white LED illumination per charge — the confirmed specification from the product brief. The 6-7 hour runtime positions the Model 1114 as a short-to-medium backup wall light suitable for early evening through mid-night operation rather than full dusk-to-dawn illumination. For Indian housing society compound staircases and hotel garden step surfaces where lighting is required during the active evening and early night hours (approximately 6 PM to midnight or 1 AM), the 6-7 hour runtime from dusk covers the peak usage period. The 1.5V 900mAh Ni-MH cell charges automatically from the 1W solar panel during the daytime optical switch-off period within 6-8 hours. The compact 10 x 5 x 3 cm housing accommodates the 900mAh cell alongside the 2-LED array and 1W panel — demonstrating the high integration density of the Model 1114 at this form factor, where the panel occupies the majority of the 10 x 5 cm face.

Body Build & Weatherproofing – IP65, 10 x 5 x 3 cm

The Solar Plastic Wall Light Model 1114 measures 10 x 5 x 3 cm — confirmed from the product photograph dimension annotations showing 10 cm width and 5 cm height, with the 3 cm depth from the product specification. At 10 x 5 x 3 cm, the Model 1114 is the most compact solar wall light in the LumenCity range — smaller in footprint than the Model 1218 (6.5 x 10 cm), the Model 1318 (7.5 x 7.5 cm), and the Model 1297 (10 x 5.5 cm). The compact 3 cm wall projection depth keeps the housing almost completely flush to the wall surface — appropriate for staircase riser walls and step edge positions where any significant wall projection creates a pedestrian hazard. IP65 waterproofing is confirmed in the product specification, protecting the 2-LED array, optical sensor, and 900mAh battery from outdoor moisture exposure. The solar panel is visible as the large central panel face occupying most of the 10 x 5 cm front surface in the product photograph, with the black plastic housing frame around the perimeter. IP65 suitability extends to the staircase and step edge positions typical of this product’s applications.

Auto Dusk-to-Dawn Operation

The Solar Plastic Wall Light Model 1114 operates via optically controlled automatic switching — confirmed as “Auto Switch on at Night, Auto Switch off in Day (Charging)” in the product specification. The integrated optical sensor activates the 2-LED warm white output when ambient light drops to the dusk threshold each evening and deactivates it at dawn. Given the 6-7 hour confirmed lighting duration, the unit illuminates for 6-7 hours after dusk activation — covering the period from approximately 6-7 PM to midnight to 1 AM in Indian summer, and from approximately 5-6 PM to 11 PM to midnight in winter. The 2-side illumination format activates across both output sides simultaneously under optical sensor control. The simple automatic operation without manual switching, remote control, or motion sensor is appropriate for housing society compound staircase lighting, hotel garden step surfaces, and farmhouse porch step edges where low-maintenance, unattended operation is essential and manual switch access is impractical at installed step edge positions.

Solar Panel & Charging Efficiency – 1W

The 1W solar panel integrated into the face of the Solar Plastic Wall Light Model 1114 charges the 900mAh battery within 6-8 hours of direct sunlight. The 1W panel occupies the majority of the 10 x 5 cm face surface — visible in the product photograph as the large central polycrystalline-effect panel grid pattern. For a 1W panel, the 900mAh Ni-MH battery is appropriately matched — the 1W panel provides sufficient daily energy to maintain the 6-7 hour nightly operation cycle under standard Indian solar conditions. For south-facing wall mount positions in direct sunlight across India’s high-irradiance states of Tamil Nadu, Telangana, Andhra Pradesh, and Rajasthan, the 1W panel achieves consistent daily 900mAh recharge within the 6-8 hour window. In high-rainfall monsoon zones of Kerala, Karnataka, and the Western Ghats, consecutive overcast days may reduce daily 1W panel output below full recharge — resulting in shorter than 6-7 hour nightly illumination on consecutive low-irradiance days. Panel type (monocrystalline/polycrystalline) is not stated in the specification.

Installation & Wall Mounting – Ultra-Compact

The Solar Plastic Wall Light Model 1114 installs on any outdoor wall surface using standard masonry fixings without external wiring, underground cable, or mains power connection. The compact 10 x 5 x 3 cm housing mounts on staircase riser walls, step edge surfaces, compound boundary walls, porch pillar bases, and any low-level wall position using two small masonry screws and wall plugs appropriate for Indian brick and concrete construction. The ultra-compact footprint and 3 cm wall projection make the Model 1114 the most unobtrusive solar wall light in the LumenCity range — appropriate for staircase riser positions where any significant wall projection creates a trip or scrape hazard for ascending and descending pedestrians. No electrician, conduit, or junction box is required. The automatic optical sensor operation requires no switch access after installation. For housing society compound staircases where multiple units are installed on consecutive step riser walls, each unit operates independently — no daisy-chaining or electrical connection between units. At 10 x 5 cm, the compact footprint fits neatly on standard Indian staircase riser wall panels without dominating the architectural surface.

Technical Specifications

Specification	Model 1114  /  Solar Plastic Wall Light  /  2-Side Illumination
Model	1114
LED	2 LED (Warm White, 2-Side Illumination)
Solar Panel	1W
Battery	1.5V 900mAh (Ni-MH)
Charging Time	6-8 Hours
Lighting Time	6-7 Hours
Light Colour	Warm White
IP Rating	IP65
Working Mode	Auto Switch On at Night / Auto Switch Off in Day (Charging)
Installation Type	Wall Mount
Unit Size	10 x 5 x 3 cm
Illumination	2-Side (Bilateral LED output)

 

Ideal Applications

• Housing society compound staircase riser wall step edge solar lighting
• Housing colony outdoor staircase and step surface warm-white solar wall lighting
• Hotel and resort garden staircase, terrace step, and outdoor step edge solar lighting
• Farmhouse porch staircase riser and step surface solar wall lighting
• Residential outdoor step, porch riser, and garden step edge solar wall lighting
• Parking compound staircase riser and step surface compact solar wall lighting
• Low-level garden path edge and retaining wall face compact solar wall lighting