5 Watt | 12 Hours Backup | IP66 Rating | Day & Night Sensor | Motion Sensor | Adjustable Solar Panel for Efficient & Fast Charging – Solar Street Light

Overview

The 5W Solar Street Light with Adjustable Panel (Model 1366) is an all-in-one, off-grid solar street light designed for housing colony internal roads and pathways, housing society compound and parking lot lighting, farmhouse driveway and estate access roads, rural roads and village pathways, boundary wall lighting, and any Indian outdoor environment requiring 12 hours of backup from a single charge. Featuring 60 LEDs at 180–200LM/W delivering 50W LED power, a 3.2V 5Ah LiFePO4 battery, a Day & Night Sensor for automatic dusk-to-dawn switching, a PIR Motion Sensor for intelligent dimming, and a uniquely Adjustable Solar Panel for Efficient & Fast Charging, the Model 1366 is built to an IP66 weatherproofing standard — the premium specification in the adjustable-panel solar street light range for India. Wall mount and pole mount installation are both supported, with no wiring or grid connection required.

LED Performance – 60 LED | 180–200LM/W | 50W

The 5W Solar Street Light Model 1366 integrates 60 LEDs achieving 180–200LM/W — a high-efficacy specification appropriate for housing colony internal road and rural road lighting at 3–4 metre installation height. At 50W LED power combined with 180–200LM/W efficacy, the 1366 produces bright cool white output suited to road surface visibility and pedestrian safety. The Day & Night Sensor ensures automatic activation at dusk and switch-off at dawn without any manual intervention. The PIR Motion Sensor manages LED output between two states — 100% full brightness on motion detection and a reduced dimming level during inactive periods — extending the 12-hour backup by conserving power during low-traffic overnight hours. Cool white is the confirmed light colour, appropriate for road and compound lighting where maximum visibility is the specification requirement.

Battery – LiFePO4 3.2V 5Ah | 12-Hour Backup

The 3.2V 5Ah LiFePO4 battery in the Model 1366 provides 12 hours of confirmed lighting time, calculated with the PIR Motion Sensor active under ideal conditions. LiFePO4 (Lithium Iron Phosphate) at 5Ah delivers 2,000+ charge-discharge cycles — more than five years of daily operation — with stable thermal performance across India’s full outdoor temperature range. LiFePO4 provides 4–5 times more charge cycles than standard Li-ion and up to 10 times more than lead-acid batteries. The 12-hour backup is achieved through the PIR Motion Sensor’s intelligent dimming — when no motion is detected, LEDs dim to the induction brightness level, conserving battery and extending total potential runtime significantly beyond a single dusk-to-dawn cycle. The 5-mode remote control enables further runtime management through 2H, 4H, and 6H timed modes.

Day & Night Sensor & PIR Motion Sensor – 5-Mode Remote Control

The Model 1366 combines a Day & Night Sensor for fully automatic dusk-to-dawn operation with a PIR Motion Sensor for intelligent brightness management — together delivering hands-free, energy-efficient performance across all five remote control modes. The Day & Night Sensor ensures the light activates at dusk and switches off at dawn every day without manual input. The PIR Motion Sensor dims the light during inactive periods and triggers 100% brightness on motion detection, maximising the 12-hour backup on low-traffic colony roads and rural pathways. The five remote control modes provide additional flexibility: OFF mode disables the unit completely; INDUCTION mode enables full auto dusk-to-dawn PIR operation; 2H, 4H, and 6H modes keep the PIR active for the selected period from dusk before switching to a reduced induction mode for the remainder of the night. This mode flexibility allows housing colony and society compound road lighting managers to match the PIR-active period to their specific security and illumination requirements — a feature not commonly offered by single-mode competing solar street lights in the Indian market.

Adjustable Solar Panel – 5V 6W Monocrystalline | Efficient & Fast Charging

The Adjustable 5V 6W Monocrystalline Solar Panel is the primary technical differentiator of the Model 1366 and a key enabler of its efficient and fast charging performance — replenishing the 5Ah LiFePO4 battery within 5–7 hours of direct sunlight. Monocrystalline panels achieve 19–22% conversion efficiency, outperforming polycrystalline (15–17%) and amorphous (10–13%) alternatives in both full-sun and diffused light conditions — the latter being critical during India’s June–September monsoon season and the shorter, lower-angle winter days of north India. The adjustable panel hinge is a unique USP — the panel can be physically angled relative to the light body after installation to optimise solar irradiance capture at different latitudes and mounting orientations across India, from the steep sun angles of south India to the shallower winter angles of north India. This adjustability ensures maximum daily harvest regardless of whether the unit is pole-mounted or wall-mounted, and regardless of the compass orientation of the installation surface — a critical charging efficiency advantage over fixed-panel competitors that lose solar harvest when mounted on non-south-facing walls or poles.

Body Build & Weatherproofing – IP66

The Model 1366 measures 33 × 16.5 × 6 cm and carries IP66 weatherproofing — certifying complete dust protection and high-pressure water jet resistance, exceeding the standard IP64 and IP65 ratings of most competing solar street lights in its wattage segment. IP66 makes the 1366 suitable for permanent outdoor installation across India’s full climate range — heavy monsoon rainfall, coastal salt-air exposure, and high-UV semi-arid dust environments. The all-in-one sealed housing integrates the 60-LED array, adjustable 5V 6W monocrystalline panel, 3.2V 5Ah LiFePO4 battery, Day & Night Sensor, PIR Motion Sensor, and remote receiver into a single compact unit. The adjustable panel is a hinged extension of the IP66 housing, physically repositioned at installation and secured at the optimal solar irradiance angle for the specific mounting location.

Installation – Wall Mount or Pole | 40mm | 3–4M | No Wiring

The Model 1366 installs on any 40mm diameter pole at 3–4 metres height or directly on any wall surface — without mains power connection, underground cable, or electrician engagement. Wall mount: the unit mounts directly on compound boundary walls, building exterior walls, and gate pillars using the included wall bracket. Pole mount: the unit mounts on any 40mm pole at 3–4 metres using the pole bracket. After mounting, the Adjustable Solar Panel is angled at the optimal solar irradiance position using the panel hinge — ensuring efficient and fast charging regardless of pole or wall orientation. The all-in-one housing keeps installation time typically under 20 minutes per unit, making the 1366 practical for housing society maintenance staff and small electrical contractors without specialist solar installation experience. Supplied at 10 units per carton, bulk procurement for colony road lighting and gram panchayat village pathway schemes is logistics-ready.

Technical Specifications

Ideal Applications

• Housing colony internal road, pathway, and cul-de-sac 5W solar street lighting
• Housing society compound, parking lot, and entrance gate solar lighting
• Farmhouse driveway, estate access road, and boundary wall solar street lighting
• Rural road, village pathway, and gram panchayat road solar street lighting
• Housing colony compound boundary wall — wall mount installation mode
• Industrial estate internal road and perimeter access road solar lighting
• Institutional campus walkway and school approach road solar lighting