150W UFO High Bay Light – Pro | 15000lm | 120° | IP65

The 150W is the middle of the Pro range and the one most working factories end up buying. 15000 lumens at 120° lights a substantial floor area from 7 to 10 metres, which covers the majority of manufacturing sheds, cold stores, assembly bays and mid-height godowns without needing an unusually dense fixture layout.

This is the wattage where the die-cast fin body stops being a nice-to-have. A fixture running twelve to sixteen hours a day under a hot metal roof spends most of its life at elevated junction temperature, and that is what determines whether it is still delivering rated output in year four or fading noticeably by year two. The full radial fin stack is the reason the Pro costs more than the equivalent reflector model, and in a continuous-shift building it is the reason to pay it.

IP65 sealing keeps dust and washdown spray out, and the 90–265V input handles unstable supply. Suspended from a steel eyebolt on chain or hook. Cool, neutral and warm white.

Ideal for

Manufacturing sheds and machine shops on double or triple shifts
Cold storage and food processing halls
Assembly bays and paint or finishing lines
Mid-height godowns and distribution floors
Automotive workshops and heavy vehicle service bays
Indoor sports halls — badminton, basketball, futsal

Not the right choice for

Ceilings below 7 m — the Pro 100W will light it properly for less
Ceilings above 10 m — specify the Pro 200W
Short-hours storage where thermal performance won’t be tested — the Reflector 150W is the value option

Planning guide: at 7–10 m, space fixtures roughly 8–11 m apart, or budget one per 60–75 m² for general working light. Machining and inspection zones want 300–500 lux, so plan tighter spacing over those areas.

Specification Detail
Model No. UFO150
Wattage 150W
Luminous Flux 15000 lumens
Efficacy 100 lm/W
LED Type 3030, 1W
Number of LEDs 210
Input Voltage 90–265V AC
Beam Angle 120°
Colour Temperature Cool / Neutral / Warm White
IP Rating IP65
Dimensions 330 × 170 mm (dia × height)
Body Material Die-cast aluminium, full radial fin housing
Mounting Suspended — steel eyebolt, chain or hook
Recommended Mounting Height 7–10 m