Solar Flame Garden Light – Flame Effect | 8-12Hr | Elite Plus

Overview

The Solar Flame Light Elite Plus (Model 1334) is an all-in-one, off-grid solar garden flame light designed for housing colony garden pathways, housing society compound walkways, hotel and resort garden path edges, farmhouse garden driveway borders, residential front garden footpaths, outdoor terrace garden borders, and any Indian outdoor garden environment where flickering flame-effect decorative path lighting is required without mains wiring. Featuring 12 Pcs 3030 LED chips in a Flame Effect working mode — producing a warm, flickering orange-yellow light that simulates a burning torch flame — and a 1.2V 1200mAh battery providing 8-12 hours of illumination, the Elite Plus delivers the most distinctive visual effect in the LumenCity garden range. A 2V 1W monocrystalline solar panel charges the battery within 6-8 hours of direct sunlight. The ground spike installation visible in the product photograph enables direct garden soil and lawn edge installation without tools or wiring. At 60 units per carton — the highest carton quantity in the LumenCity solar range — the Elite Plus is suited to both individual buyers and bulk procurement for housing society garden path lighting, hotel garden walkway schemes, and farmhouse driveway border projects across India.

LED Performance & Flame Effect Output – 12 Pcs 3030 LED

The Solar Flame Light Elite Plus 1334 integrates 12 Pcs 3030 LED chips configured in the Flame Effect working mode — the confirmed single working mode for this product as specified in the image. The 3030 LED chip format is a mid-power chip used in solar flame lights for its compact form factor and ability to produce the warm orange-yellow colour output at low power draw required for flame simulation. In Flame Effect mode, the 12-chip array generates a flickering, dancing warm light pattern that replicates the visual appearance of a burning torch or oil lamp flame — the defining characteristic of solar mashaal and solar flame torch lights as listed on IndiaMart and Amazon.in India. The flickering flame output is produced through rapid dimming variation across the 12 LED chips, creating the non-uniform, organic light movement that distinguishes flame-effect solar lights from static warm-white garden path lights. The Elite Plus is explicitly named above the standard Flame Light model, indicating a higher-specification version with the confirmed 3030 chip type, 1200mAh battery, and 2V 1W monocrystalline panel versus competing products that use lower-specification panels and batteries.

Battery – 1.2V 1200mAh Capacity & Backup

The 1.2V 1200mAh battery in the Solar Flame Light Elite Plus 1334 is the appropriate battery specification for this product category. The 1.2V cell voltage is characteristic of Nickel-Metal Hydride (Ni-MH) rechargeable batteries — the standard chemistry for compact solar garden spike lights in this form factor and price range, where the smaller 1.2V cell provides the energy density required for the low-power 3030 LED flame effect array within a compact spike light housing. The 1200mAh capacity at 1.2V provides sufficient energy to power the 12-chip 3030 LED Flame Effect array through 8-12 hours of nightly operation. As confirmed in the product specification: lighting time depends on working mode and battery charging. The battery charges automatically from the integrated 2V 1W monocrystalline solar panel during daylight hours within the 6-8 hour charging window. At 1200mAh capacity in the solar flame garden light category, the Elite Plus matches the battery specification of comparable products from competing brands at equivalent price points on Amazon.in and IndiaMart.

Body Build & Design

The Solar Flame Light Elite Plus 1334 measures 65.5 x 8.5 x 5.5 cm — a slim, tall spike light form factor with the solar panel integrated at the top, the LED flame housing in the mid-section, and the ground spike at the base, as visible in the product photograph. The 65.5 cm total length includes the ground spike, with the LED flame housing positioned at garden torch height when the spike is inserted into garden soil. The slim 8.5 x 5.5 cm cross-section profile is appropriate for garden path edge installation where the light occupies minimal planting space. The product photograph shows the warm orange-yellow flickering flame effect in operation against a garden path background — the flame housing uses a translucent diffuser that refracts and scatters the 12-chip 3030 LED output to create the visually convincing flame effect visible from multiple viewing angles along the garden path. Note: no IP rating is stated in the product image — the weatherproofing specification for this product has not been confirmed and is not listed in this document.

Flame Effect Working Mode & Dusk-to-Dawn Operation

The Solar Flame Light Elite Plus 1334 operates in a single confirmed working mode: Flame Effect, as specified in the product image. Flame Effect mode activates the 12 Pcs 3030 LED chips in a flickering, dancing warm orange-yellow pattern that simulates a burning torch or oil lamp flame — the defining visual characteristic that distinguishes this product from static warm-white or cool-white solar garden path lights. The dusk-to-dawn automatic light sensor activates the unit at dusk each evening and switches it off at dawn without manual operation — a confirmed standard operating behaviour for solar garden spike lights in this category on IndiaMart and Amazon.in. For Indian buyers, the Flame Effect mode is particularly relevant for Diwali garden decoration, Navratri outdoor lighting, garden wedding and event decoration, and permanent garden path ambience lighting on farmhouse garden paths and hotel resort garden walkways where the flickering flame aesthetic enhances the outdoor hospitality environment. The single-mode design without additional brightness settings or remote control is appropriate for the decorative category where consistent flame effect operation is the primary purchase requirement.

Solar Panel & Charging Efficiency

The 2V 1W monocrystalline solar panel integrated into the Solar Flame Light Elite Plus 1334 charges the 1.2V 1200mAh battery within 6-8 hours of direct sunlight. The 2V 1W panel specification is the confirmed figure from the product image. Monocrystalline silicon achieves 19-22% conversion efficiency under standard test conditions — a performance advantage over the polycrystalline panels used in many competing solar flame and garden spike lights at equivalent price points on Amazon.in and IndiaMart. The panel is integrated into the top of the 65.5 cm spike light housing and faces skyward when the unit is installed at the correct orientation — receiving unobstructed direct sunlight on garden path edges and lawn borders where the Elite Plus is typically installed. The monocrystalline specification is most relevant for Indian buyers in high-rainfall monsoon zones — Kerala, Karnataka, Western Ghats — where diffused irradiance during June-September reduces panel output and competing solar flame lights with lower-efficiency panels fail to achieve full battery recharge on consecutive overcast days.

Installation & Mounting

The Solar Flame Light Elite Plus 1334 installs without external wiring, underground cable, or mains power connection. The ground spike visible at the base of the unit in the product photograph inserts directly into garden soil, lawn edge, flower bed earth, or soft garden path border — hand-pushed into position without tools in under a minute per light, making the Elite Plus the fastest-installing solar garden light in the LumenCity range. No electricians, conduit work, or civil works are required — the unit is pushed into position at the desired garden path edge location, the solar panel begins charging immediately on the first day, and dusk-to-dawn flame effect operation begins automatically on the first evening after the initial 6-8 hour charge. For Indian housing society garden committees and hotel garden managers specifying decorative flame-effect path lighting, the spike installation enables the lights to be repositioned seasonally without leaving any permanent marks or damage to the garden surface. The 60-unit carton quantity — the highest in the LumenCity solar range — makes the Elite Plus the most cost-effective procurement option for large-scale colony garden path lighting schemes, hotel resort garden walkway installations, and farmhouse garden driveway border projects requiring consistent flame-effect decorative lighting across extended path lengths.

Technical Specifications

Ideal Applications

• Housing colony garden footpath and lawn path edge decorative flame-effect lighting
• Housing society compound walkway and garden path border flickering flame torch lighting
• Hotel and resort garden walkway, courtyard path edge, and landscape ambience lighting
• Farmhouse garden driveway border, lawn path edge, and estate entrance decorative lighting
• Residential front garden footpath, gate approach, and garden bed border lighting
• Diwali, Navratri, and outdoor garden event decorative mashaal flame torch lighting
• Outdoor wedding venue garden path, farmhouse event garden, and resort landscape lighting