100W Reflector High Bay Light | 10000lm | 120° | IP65

The 100W is where the reflector range changes character. The beam opens from 90° to 120°, trading the tight downward throw of the smaller models for broad, overlapping coverage — the difference between lighting a workbench and lighting a floor. At 10000 lumens it is the natural starting point for anyone lighting a whole building rather than a work area.

It suits 5 to 7 metre roofs, which describes most godowns, storage sheds, light assembly halls and covered yards. Because the reflector body costs less to manufacture than a die-cast finned fixture of the same output, this is the value choice at 10000 lumens — a sensible pick for spaces running moderate daily hours rather than continuous shifts. If your lights stay on twelve hours or more in a hot shed, the UFO Pro at the same wattage will hold its brightness longer.

Die-cast aluminium housing with finned heat sink and spun aluminium reflector, matt black outside with a polished dimpled silver interior. Eyebolt suspension on chain or hook, 90–265V input, IP65 sealed. Cool, neutral and warm white.

Ideal for

Godowns, storage sheds and distribution stores
Light assembly and production halls
Covered yards, canopies and semi-open sheds
Gymnasiums, community halls and indoor sports rooms
Basement and multi-level parking
Poultry, dairy and agricultural sheds

Not the right choice for

Ceilings above 7 m — go to 120W or 150W
Continuous 12+ hour operation in high ambient heat — choose the UFO Pro 100W
Narrow spaces needing concentrated task light — the 50W or 60W at 90° is better

Planning guide: at 5–7 m, space fixtures roughly 6–8 m apart, or budget one per 40–50 m² for general storage-level light.

Specification Detail
Model No. HBNEW100
Wattage 100W
Luminous Flux 10000 lumens
Efficacy 100 lm/W
LED Type 3030, 1W
Number of LEDs 120
Input Voltage 90–265V AC
Beam Angle 120°
Colour Temperature Cool / Neutral / Warm White
IP Rating IP65
Dimensions 450 × 320 mm (dia × height)
Body Material Die-cast aluminium with aluminium reflector
Finish Matt black exterior, polished silver reflector interior
Mounting Suspended — eyebolt hook or chain
Recommended Mounting Height 5–7 m