180W Reflector High Bay Light | 18000lm | 120° | IP65

The 180W is the brightest fixture in the reflector range and exists for tall roofs where smaller high bays simply cannot deliver usable light at floor level. At 8 to 12 metres, a 100W fitting produces a dim wash and nothing more; 18000 lumens arrives with enough intensity that the floor, the machinery and the lower racking all read clearly.

It suits large industrial sheds, high-racked warehouses, grain and cold storage buildings, and covered yards with crane clearance. At this wattage the reflector construction is a genuine commercial argument rather than a compromise: on a fifty-fixture project the saving against equivalent die-cast finned bodies is substantial, and for buildings running single or double shifts rather than round the clock, the thermal difference doesn’t change the outcome.

Die-cast aluminium housing with finned heat sink and spun aluminium reflector, matt black outside with polished dimpled silver inside. Eyebolt suspension, 90–265V input, IP65 sealed. Cool, neutral and warm white.

Ideal for

Large industrial sheds with exposed truss roofs
High-racked warehouses and distribution hubs
Grain storage, cold storage and processing plants
Steel fabrication and heavy engineering units
Covered yards and transport sheds with crane rails
Large indoor sports arenas and exhibition halls

Not the right choice for

Ceilings below 8 m — you’ll get glare and pay for light you’re wasting
Ceilings above 12 m — specify the UFO Pro 200W
Continuous three-shift operation in a hot, unventilated roof space — choose the UFO Pro

Planning guide: at 8–12 m, space fixtures roughly 9–13 m apart, or budget one per 75–90 m² for general storage light. Verify structural capacity before hanging at this size — these are the heaviest fixtures in the range.

Specification Detail
Model No. HBNEW180
Wattage 180W
Luminous Flux 18000 lumens
Efficacy 100 lm/W
LED Type 3030, 1W
Number of LEDs 180
Input Voltage 90–265V AC
Beam Angle 120°
Colour Temperature Cool / Neutral / Warm White
IP Rating IP65
Dimensions 450 × 320 mm (dia × height)
Body Material Die-cast aluminium with aluminium reflector
Finish Matt black exterior, polished silver reflector interior
Mounting Suspended — eyebolt hook or chain
Recommended Mounting Height 8–12 m