6W LED Burial Light – RGB Remote | IP68 | Inground

Overview

The 6W LED Burial / Facade Inground Light (Model 1144) is a wired LED recessed inground uplighter designed for garden pathway inground lighting, housing society compound garden path uplighting, hotel and resort courtyard and garden inground feature lighting, farmhouse garden inground path lighting, water feature and fountain perimeter uplighting, housing colony compound walkway ground lighting, and any Indian indoor or outdoor ground surface requiring flush-recessed LED inground uplighting with RGB colour-changing and remote control. Featuring 3030 6 Pcs 3030 LED chips, IP68 waterproofing, 220V AC input, RGB with remote and Warm White (WW) colour modes confirmed from the product specification, and a 30-degree beam angle, the Model 1144 delivers recessed inground LED uplighting in a 12 x 9 cm outer housing. A 11.5 cm diameter cut-out in the ground surface is required for flush installation. IP68 — the highest IP waterproofing rating — certifies complete dust ingress protection and continuous submersion resistance, enabling the Model 1144 to be installed in ground positions subject to standing water, garden irrigation runoff, and monsoon rainfall across India.

LED Performance – 3030 6 Pcs | 30° Beam | WW+RGB

The 6W LED Burial Light Model 1144 integrates 3030 6 Pcs chips in 3030 LED format at a 30-degree beam angle, delivering both WW (Warm White) and RGB (Red-Green-Blue) colour modes controlled via the confirmed remote control. The 3030 LED chip format is a high-output surface-mount chip appropriate for the concentrated inground uplight application where maximum luminous output from a compact chip array is required. The 30-degree narrow beam angle concentrates the LED output into a focused upward beam appropriate for garden feature uplighting — illuminating shrubs, ornamental trees, architectural columns from below, and water feature walls — from the ground-flush recessed position. The RGB remote control enables colour selection between warm white functional garden path inground lighting and the full RGB colour spectrum for festive Diwali, Navratri, and garden event colour-change decoration on Indian housing society compound gardens, hotel courtyards, and farmhouse estate gardens.

Body Build & Weatherproofing – IP68 | Outer 12 x 9 cm | Cut 11.5 cm

The 6W LED Burial Light Model 1144 has an outer size of 12 x 9 cm requiring a 11.5 cm diameter ground cut-out for flush installation. IP68 waterproofing is the highest confirmed IP rating in the LumenCity wired LED range — IP68 certifies continuous submersion protection at defined depth and duration, far exceeding the IP65 water jet resistance of standard outdoor wall lights and the IP67 momentary submersion resistance of many competing inground lights on IndiaMart. The IP68 specification enables the Model 1144 to be installed in Indian garden ground positions subject to standing water during monsoon flooding, garden irrigation, and water feature runoff — applications that IP65 and IP67 alternatives cannot safely serve. The stainless steel rim and sealed body visible in the product photograph provide corrosion resistance appropriate for permanent inground installation in Indian garden soil and path edge positions.

Remote Control & RGB Modes – 220V AC

The 6W LED Burial Light Model 1144 operates on 220V AC — confirmed from the product image spec table. Remote control is confirmed: the product specification states “RGB With Remote” and the wireless remote control is visible in the product photograph. The remote enables colour selection between WW (Warm White) and the full RGB spectrum. The 220V AC input is India’s standard mains supply voltage, enabling direct connection without voltage conversion. No solar panel, battery, or off-grid function is specified. For housing society compound garden path inground lighting schemes and hotel courtyard inground feature lighting where both permanent warm white operation and festive RGB colour decoration are required from the same inground fitting, the WW/RGB dual-mode remote specification of the Model 1144 provides the complete lighting specification in a single fitting.

Mains Power – Not Solar

Not applicable — this is a mains-powered wired LED inground light on 220V AC. No solar panel, battery, or backup time applies.

Installation – Recessed Inground | Cut 11.5 cm

The 6W LED Burial Light Model 1144 requires a 11.5 cm diameter ground cut-out and 220V AC mains wiring by a qualified electrician. The installation sequence: excavate the 11.5 cm ground cut to the depth of the 12 x 9 cm housing; route the 220V AC mains cable through underground conduit to the cut position; connect the LED burial light in the underground junction box; lower the housing into the ground cut; secure the stainless steel rim flush with the ground surface. Underground conduit protects the 220V AC cable from ground moisture and physical damage across the cable run from the distribution board to each burial light position. For Indian housing society compound garden path inground lighting schemes, hotel courtyard inground feature lighting, and farmhouse garden path uplighting projects, multiple burial lights can be connected in a series circuit from a single underground conduit run, reducing installation cost per fitting.

Technical Specifications

Ideal Applications

• Housing society compound garden path inground 6W RGB uplighting
• Hotel and resort courtyard, garden path, and feature wall inground uplighting
• Farmhouse estate garden path, lawn border, and feature tree inground lighting
• Housing colony compound walkway and landscape garden inground path lighting
• Water feature, fountain perimeter, and garden pond edge RGB inground lighting
• Commercial complex landscape garden and outdoor plaza inground feature lighting
• Festive Diwali and Navratri RGB colour-change garden ground uplighting decoration