35 Watt | 24 Hours | Long Backup | Heavy Duty Body | IP65 Rating | Day & Night Sensor | Motion Sensor | Wall Mount Incl – Solar Street Light

Overview

The 35W Solar Street Light (Apple Model 1270) is the highest-wattage variant in the Apple Model series and one of the most capable all-in-one solar street lights in the Indian market, designed for wide housing society main roads, large colony primary streets, panchayat district highways, industrial estate main access roads, large parking areas, and farmhouse estate primary driveways across India. Featuring 864 Pcs 0.5W LED chips at a combined 450W output in cool white and a 3.2V 56Ah LiFePO4 battery providing a full 24 hours of illumination at installation heights of 7–10 metres, the Apple Model 1270 delivers the highest LED count, the highest combined LED power, and the largest battery capacity of any standard all-in-one solar street light in the LumenCity range. A 5V 50W monocrystalline solar panel, IP65 weatherproofing, heavy duty body, day & night sensor, radar motion sensor, wall mount bracket, and wireless remote control complete the specification. The 7–10 metre installation height positions the 35W Apple Model for wide municipal and semi-commercial road lighting applications where lower-wattage all-in-one units cannot provide adequate luminance at the required mounting height.

LED Performance & Light Output

The Apple Model 1270 integrates 864 Pcs 0.5W LED chips — 50% more than the 28W model — at a combined 450W output in cool white. This is the highest LED chip count in the standard LumenCity all-in-one solar street light range and is a direct competitive differentiator online at the 35W wattage tier, where most competing products list 100–300 chip counts at equivalent stated wattages. The 0.5W per chip distribution across 864 chips produces an exceptionally even illumination pattern across the Apple Model’s flat-panel array, with minimal hotspots and low glare at the 7–10 metre installation heights appropriate for wide road lighting applications. At 450W combined LED output in cool white, the 1270 delivers the road surface luminance required for 7–10 metre mounting on housing society main roads of 6–10 metres width, panchayat district highway approaches, and large parking lot perimeters where lower-output all-in-one solar lights would produce insufficient ground-level illuminance for vehicle and pedestrian safety.

Battery – LiFePO4 56Ah Capacity & 24-Hour Backup

The 3.2V 56Ah LiFePO4 battery in the Apple Model 1270 is the largest LiFePO4 battery specification in the standard LumenCity all-in-one range and provides 33% more energy storage than the 28W model’s 42Ah unit, matching the higher 450W LED draw to deliver a full 24-hour backup performance at greater output. At 56Ah, the LiFePO4 battery provides a substantial energy reserve that sustains 24-hour operation through sensor-managed dimming on low-to-medium traffic roads, and extends functional backup across the consecutive overcast days that characterise India’s monsoon season in coastal states, the Western Ghats, and north-east India. Competing 35W all-in-one solar street lights online typically specify 12Ah to 30Ah batteries; the 35W Apple Model’s 56Ah LiFePO4 specification is the primary purchase-intent differentiator for buyers searching for extended 24-hour backup solar road lighting in housing society and municipal procurement contexts. LiFePO4 chemistry at 56Ah delivers 2,000+ cycles, providing over five years of daily operation without the capacity degradation and maintenance demands of competing lead-acid or lower-grade Li-ion alternatives.

Heavy Duty Body & Weatherproofing

The Apple Model 1270 features a heavy duty body construction with IP65 weatherproofing certification, confirming complete dust ingress protection and resistance to water jets from any direction across all outdoor conditions encountered in India’s diverse climate zones. At 61 × 39 × 10 cm, the 35W Apple Model is the largest unit in the standard LumenCity all-in-one range, with a 10 cm wider panel than the 28W model to accommodate the 864-chip array. The heavy duty flat-panel Apple Model body design provides a large LED aperture at minimal depth, resulting in a lower aerodynamic profile at 7–10 metre installation heights compared to deeper all-in-one housings that present greater wind loading on tall poles. IP65 sealing protects the 864-chip array, high-current driver, and 56Ah LiFePO4 battery from moisture, dust, and the thermal cycling associated with India’s extreme seasonal temperature ranges — from sub-zero January nights in north India’s hill districts to 48°C summer conditions in Rajasthan and Madhya Pradesh. The sealed heavy duty housing eliminates the field maintenance requirements associated with unsealed solar street light electronics in high-dust and high-humidity Indian environments.

Smart Controls – Day & Night Sensor, Motion Sensor & Operating Modes

The Apple Model 1270 is equipped with both a day & night sensor and a radar motion sensor, along with a wireless remote control providing the full operating mode set. The day & night sensor ensures fully automatic dusk-to-dawn activation with zero manual intervention required — a critical feature for municipal, panchayat, and housing society installations where daily manual switching is impractical. The motion sensor follows the standard three-state pattern: 10% optical brightness at startup, 100% on motion detection, 15% brightness for 30 seconds post-motion. At 450W combined LED output, this intelligent dimming is more consequential to extended 24-hour backup performance than at any lower-wattage product in the range — without sensor-managed dimming, constant 450W consumption would deplete the 56Ah LiFePO4 battery in approximately 8–9 hours. The combined day & night and motion sensor management across a low-to-medium traffic housing society main road reduces average consumption to approximately 60–80W overnight, enabling the 56Ah battery to sustain the full 24-hour specification under ideal conditions. Remote operating modes include OFF/ON, Motion Sensor, Auto, and timed modes at 2H, 3H, and 4H. The 2H and 3H timed modes are the recommended configurations for housing society main road entrance gates and large parking lots where full-brightness illumination is required for the 7–10 PM peak period and sensor-managed low brightness is appropriate through the night.

Solar Panel & Charging Efficiency

The 5V 50W monocrystalline solar panel in the Apple Model 1270 is the highest-rated panel in the standard LumenCity all-in-one range, providing 25% greater peak output than the 28W model’s 40W panel. At 50W, the monocrystalline panel harvests sufficient energy during 6–8 hours of direct sunlight to replenish the 56Ah LiFePO4 battery for the next night’s 24-hour operation cycle. Monocrystalline efficiency of 19–22% maintains reliable charging under India’s most challenging irradiance conditions — including the 90+ day monsoon season in the Western Ghats and north-east, the 60-day monsoon in coastal Andhra Pradesh and Odisha, and the short-day winter period in Delhi, Haryana, and Uttar Pradesh where solar street light battery failures are most common among polycrystalline-equipped competing products. For municipal and housing society project specifications that include a 10–15 year operational life requirement, the monocrystalline panel’s superior degradation characteristics — typically 0.3–0.5% annual output loss versus 0.5–0.8% for polycrystalline — provide a measurable long-term performance advantage. The factory-integrated panel angle removes on-site tilt calibration requirements across bulk project installations.

Installation & Wall Mount

The Apple Model 1270 installs without external wiring, trenching, or grid connection. The fully pre-assembled unit includes a wall mount bracket, making it suitable for boundary walls, building facades, compound perimeter walls, gate pillars, and large parking area boundary structures in addition to standard pole mounting at 7–10 metres height. The wall mount inclusion significantly expands deployment flexibility for housing societies, industrial estates, and municipal installations where wall-mounted perimeter lighting is preferred or where pole installation is not feasible. At 7–10 metres pole height, the 35W Apple Model spans the boundary between residential-commercial and entry-level municipal road lighting, making it the appropriate specification for housing society main boulevard lighting, large apartment complex primary access roads, panchayat market road lighting, and industrial estate main entrance road illumination. The 24-hour backup specification combined with the off-grid, no-wiring installation design makes the Apple Model 1270 directly relevant to rural district road lighting tenders, where grid connection at each lighting point is commercially impractical and extended backup reduces the service-call frequency associated with short-backup solar lights failing before dawn in India’s longer winter nights. Supplied at 4 units per carton.

Technical Specifications

Ideal Applications

• Wide housing society main boulevard and primary road lighting
• Large apartment complex and township primary access road lighting
• Panchayat district market road and highway approach lighting
• Industrial estate main road and large parking lot lighting
• Large open parking areas and commercial complex perimeter lighting
• Farmhouse estate main drive and rural district road lighting
• Semi-commercial outdoor road lighting for off-grid installations