Overview
The 6W LED Under-water Spot / Fountain Light (Model 1149) is a wired, fully submersible LED underwater spotlight designed for garden fountain and water feature uplighting, housing society compound decorative fountain and fish pond lighting, hotel and resort pool-side and water feature fountain lighting, farmhouse garden pond and water garden feature lighting, public park and commercial complex fountain installation uplighting, shopping mall and hotel lobby water feature lighting, and any Indian indoor or outdoor water feature or fountain installation requiring submersible RGB remote-controlled LED uplighting. Featuring 3030 6 Pcs in 3030 chip format, SS304 (marine-grade stainless steel) body construction, IP68 waterproofing for full continuous submersion, 24V AC/DC low-voltage input for water-safe operation, and remote-controlled RGB colour-changing with WW (Warm White) and Blue modes, the Model 1149 delivers the complete underwater fountain light specification at 12 x 14 cm outer dimensions. The 30-degree narrow beam concentrates the LED output in a focused upward column appropriate for fountain jet uplighting, submerged garden pond feature lighting, and water garden ornament uplighting.
LED Performance – 3030 6 Pcs | 30° Beam | WW / Blue / RGB
The 6W Underwater Fountain Light Model 1149 integrates 3030 6 Pcs 3030 chip format LEDs delivering confirmed Warm White (WW), Blue, and RGB colour modes via remote control. The 3030 chip format at the 6W output level is appropriate for the concentrated 30-degree narrow beam uplight application. The 30-degree beam angle focuses the LED output in a tight upward column — the standard configuration for fountain jet uplighting, submerged garden ornament uplighting, and pool water feature accent lighting. The RGB remote control enables full colour spectrum selection — Red, Green, Blue, and mixed RGB combinations — in addition to the functional WW warm white mode and the Blue mode confirmed in the product specification. For Indian housing society compound decorative fountain lighting, hotel lobby water feature RGB colour decoration, and public park fountain installation lighting, the RGB remote-controlled output enables festive colour-change display during Diwali, Navratri, and other Indian seasonal events.
Body Build & Weatherproofing – SS304 | IP68 | 12 x 14 cm
The 6W Underwater Fountain Light Model 1149 uses SS304 (AISI 304 grade stainless steel) body construction — the marine-grade stainless steel specification standard for underwater LED fountains and pool lights across India. SS304 provides corrosion resistance in freshwater fountain and pond environments across India’s full climate range — monsoon-season fountain pools, hotel lobby water features with treated water, and garden pond installations with ambient air salinity in coastal locations including Goa, Mumbai, Chennai, and Kerala. The outer dimensions are 12 x 14 cm. IP68 is the highest waterproof standard in the LumenCity wired LED range — confirmed for this series from the product specification — certifying continuous submersion resistance appropriate for permanent underwater fountain installation. The 24V AC/DC low-voltage input provides the water-safety advantage over 220V mains-powered alternatives: 24V is the internationally recognised safe voltage for underwater lighting applications in India and globally.
Remote Control & 24V Low-Voltage Safety
The 6W Underwater Fountain Light Model 1149 is controlled by a wireless remote with confirmed RGB colour modes. The 24V AC/DC input requires a step-down transformer or SMPS power supply converting India’s 220V mains supply to the 24V operating voltage — note that the 24V power supply is not confirmed as included and should be verified at procurement. The remote enables full colour mode selection — WW, Blue, and full RGB spectrum — from outside the water feature without any physical contact with the submerged fitting. For hotel lobby and commercial complex water feature installations where the fountain light is permanently submerged and inaccessible for manual adjustment, remote control is the only practical colour management method. The 24V low-voltage specification eliminates the electric shock risk associated with 220V mains-voltage submersible fittings, complying with Indian and international safety standards for underwater luminaires.
Mains Power – Not Solar | 24V AC/DC Input
Not applicable — this is a wired LED underwater spotlight on 24V AC/DC input. No solar panel, battery, backup time, or off-grid function applies. A separate 24V power supply (SMPS or step-down transformer) converting India’s 220V mains to 24V is required. The power supply should be installed in a sheltered, dry position outside the water feature. Note: 24V power supply is not confirmed as included with the product — verify at procurement.
Installation – Submersible | SS304 Bracket
The 6W Underwater Fountain Light Model 1149 is installed in the base of garden fountains, decorative ponds, fish ponds, hotel lobby water features, and public park fountain basins using the adjustable SS304 mounting bracket visible in the product photograph. The bracket enables the 30-degree beam to be directed precisely at the target fountain jet, water feature ornament, or pond surface feature. Underwater conduit protects the 24V cable run from the power supply position to the fountain basin edge and into the water. The 24V power supply (SMPS or transformer) is installed outside the water feature at a safe, sheltered position. For housing society compound fountain installations and hotel lobby water feature lighting projects where multiple underwater spot lights are installed in a single fountain basin, multiple units can be connected in a parallel circuit from a single 24V power supply, reducing installation complexity.
Technical Specifications
| Specification | Model 1149 / 6W Underwater Fountain Light / SS304 |
| Model | 1149 |
| Power | 6W |
| LED Chips | 3030 6 Pcs |
| Input Voltage | 24V AC/DC |
| Outer Size (cm) | 12 x 14 cm |
| Beam Angle | 30 degrees |
| IP Rating | IP68 (fully submersible) |
| Body Material | SS304 Stainless Steel |
| Colour Modes | WW, Blue, RGB (RGB With Remote) |
| Remote Control | RGB With Remote (confirmed) |
| Power Source | 24V AC/DC wired (NOT solar) |
Ideal Applications
- Housing society compound decorative fountain and fish pond 6W RGB uplighting
- Hotel and resort lobby, courtyard, and garden water feature fountain lighting
- Farmhouse garden pond, water garden, and decorative water feature uplighting
- Public park and commercial complex fountain basin RGB underwater lighting
- Swimming pool, lap pool, and spa pool underwater feature lighting
- Shopping mall water feature, hotel lobby fountain, and aquatic display lighting
- Garden ornamental pond, water cascade, and garden fountain uplighting











Anshita –
Very good product n super easy to install.
Pankaj –
Worth buying, bright UNDERWATER RGB LIGHT , built quality also good, using from a week no issues, thanks to Lumen city
Ashwini –
Brightness high quality products is very nice……….
Monika –
Good quality low price and longer working life.